![]() Last but not least! Does Adobe have different alignments to choose from? I'm 95% sure the crossover will be an acoustic 3rd order Butterworth between 1.2 and 1. It'd be a cool configuration, but not what I'm going for. The DC/Looney Tunes crossover comics are all free to read with registration on DC UNIVERSE INFINITE from now through July 17 th. Since I'm leaning toward using a lower crossover point, I can't just pick 2nd order electrical and hope the tweeter's 6db rolloff plays well, making a 3rd order acoustic rolloff. To borrow from one of Looney Tunes’ biggest stars, to do otherwise would be despicable. I do need to know a couple things I couldn't see in the literature I came across online though: do you have access to the crossover slope and delay for each channel? And is there a way to adjust phase? Like I said, the upper (and larger) portion of my tweeter's bottom octave rolls off at approximately ~6db/octave until the point where the final, steeper slope of 12db/oct kicks in, covering approximately 10 to 35% of the bottom of the tweeter's bottom octave - depending on the final crossover point. This method of playback is compatible with how I listen to music through my system, so I'm open to it. In your experience, is what I described possible with Dephonica?įrom what I can tell with Adobe Audition, crossover functionality isn't built into the software like some of the other suggestions, rather you process a full band stereo track into a filtered, multi-channel track for playback (which ends up being 4, 6, or 8 channels depending on if you have 2, 3, or 4 way speakers). Configured this way I won't drive them hard. The acoustic crossover I want to end up with is a 3rd order butterworth. ![]() Fortunately the tweeter is very clean and it has a 0.5mm xmax. I'm using a low crossover point to achieve the flattest power response possible. This will require a ~6db boost at 750hz, gradually lessening to 0db at 1.5khz. Things to Know Before Using CrossOver Compatibility Tool Not every Windows software will work using CrossOver. The tweeter has an extremely strong magnet so it starts rolling off slowly at 1.5khz (~6db/oct) before its 12db/oct roll off at about 750hz.īecause my target crossover point is between 1.2 and 1.4khz, I need to flatten the tweeter's response down to 6-700hz before I apply the final crossover filter. The first speakers I'm going to do are 2 ways with 1 inch tweeters and a 5 1/4" effective diameter woofer (cone + 1/3 surround). ![]() ![]() Amplitude and phase equalizers for arbitrary amplitude and phase response correction with data import features (from text file or from impulse response in WAV format). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |